The 2006-2011 World Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters

The 2006-2011 World Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters Review

See more picture

The 2006-2011 World Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters Feature

WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is impl

Check price now

Rerate Products

Customer Review

The 2007-2012 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in Japan

The 2007-2012 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in Japan Review

See more picture

The 2007-2012 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in Japan Feature

This study covers the latent demand outlook for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters across the prefectures and cities of Japan. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 1,000 cities in Japan. For each city in question, the percent share the city is of it’s prefecture and of Japan is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-à-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each prefecture and city, latent demand estimates are created for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

Check price now

Rerate Products

Customer Review

The 2007-2012 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Japan

The 2007-2012 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Japan Review

See more picture

The 2007-2012 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Japan Feature

This study covers the latent demand outlook for steel sheet metal awnings, canopies, carports, and patios across the prefectures and cities of Japan. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 1,000 cities in Japan. For each city in question, the percent share the city is of it’s prefecture and of Japan is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-à-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each prefecture and city, latent demand estimates are created for steel sheet metal awnings, canopies, carports, and patios. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

Check price now

Rerate Products

Customer Review

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in the United States

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in the United States Review

See more picture

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in the United States Feature

This econometric study covers the latent demand outlook for steel sheet metal awnings, canopies, carports, and patios across the states and cities of the United States. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 13,000 cities in the United States. For each city in question, the percent share the city is of it's state and of the United States is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each state and city, latent demand estimates are created for steel sheet metal awnings, canopies, carports, and patios. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities in the United States). This study gives, however, my estimates for the latent demand, or the P.I.E., for steel sheet metal awnings, canopies, carports, and patios in the United States. It also shows how the P.I.E. is divided and concentrated across the cities and regional markets of the United States. For each state, I also show my estimates of how the P.I.E. grows over time. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on strategic planning at graduate schools of business.

Check price now

Rerate Products

Customer Review

The 2009-2014 World Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios

The 2009-2014 World Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios Review

See more picture

The 2009-2014 World Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios Feature

This econometric study covers the world outlook for steel sheet metal awnings, canopies, carports, and patios across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the 230 countries of the world). This study gives, however, my estimates for the worldwide latent demand, or the P.I.E., for steel sheet metal awnings, canopies, carports, and patios. It also shows how the P.I.E. is divided across the world's regional and national markets. For each country, I also show my estimates of how the P.I.E. grows over time (positive or negative growth). In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on international strategic planning at graduate schools of business.

Check price now

Rerate Products

Customer Review

The 2011-2016 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in Japan

The 2011-2016 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in Japan Review

See more picture

The 2011-2016 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in Japan Feature

This econometric study covers the latent demand outlook for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters across the prefectures and cities of Japan. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 1,000 cities in Japan. For each city in question, the percent share the city is of it's prefecture and of Japan is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each prefecture and city, latent demand estimates are created for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities in Japan). This study gives, however, my estimates for the latent demand, or the P.I.E., for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters in Japan. It also shows how the P.I.E. is divided and concentrated across the cities and regional markets of Japan. For each prefecture, I also show my estimates of how the P.I.E. grows over time. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on strategic planning at graduate schools of business.

Check price now

Rerate Products

Customer Review

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Japan

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Japan Review

See more picture

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Japan Feature

This econometric study covers the latent demand outlook for steel sheet metal awnings, canopies, carports, and patios across the prefectures and cities of Japan. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 1,000 cities in Japan. For each city in question, the percent share the city is of it's prefecture and of Japan is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each prefecture and city, latent demand estimates are created for steel sheet metal awnings, canopies, carports, and patios. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities in Japan). This study gives, however, my estimates for the latent demand, or the P.I.E., for steel sheet metal awnings, canopies, carports, and patios in Japan. It also shows how the P.I.E. is divided and concentrated across the cities and regional markets of Japan. For each prefecture, I also show my estimates of how the P.I.E. grows over time. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on strategic planning at graduate schools of business.

Check price now

Rerate Products

Customer Review

The 2011-2016 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in India

The 2011-2016 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in India Review

See more picture

The 2011-2016 Outlook for Steel and Aluminum Sheet Metal Awnings, Canopies, Carports, Soffit, and Shutters in India Feature

This econometric study covers the latent demand outlook for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters across the states, union territories and cities of India. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across over 5,100 cities in India. For each city in question, the percent share the city is of it's state or union territory and of India as a whole is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each state or union territory and city, latent demand estimates are created for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities in India). This study gives, however, my estimates for the latent demand, or the P.I.E., for steel and aluminum sheet metal awnings, canopies, carports, soffit, and shutters in India. It also shows how the P.I.E. is divided and concentrated across the cities and regional markets of India. For each state or union territory, I also show my estimates of how the P.I.E. grows over time. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on strategic planning at graduate schools of business.

Check price now

Rerate Products

Customer Review

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in India

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in India Review

See more picture

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in India Feature

This econometric study covers the latent demand outlook for steel sheet metal awnings, canopies, carports, and patios across the states, union territories and cities of India. Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across over 4,800 cities in India. For each city in question, the percent share the city is of it's state or union territory and of India as a whole is reported. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. This statistical approach can prove very useful to distribution and/or sales force strategies. Using econometric models which project fundamental economic dynamics within each state or union territory and city, latent demand estimates are created for steel sheet metal awnings, canopies, carports, and patios. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities in India). This study gives, however, my estimates for the latent demand, or the P.I.E., for steel sheet metal awnings, canopies, carports, and patios in India. It also shows how the P.I.E. is divided and concentrated across the cities and regional markets of India. For each state or union territory, I also show my estimates of how the P.I.E. grows over time. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on strategic planning at graduate schools of business.

Check price now

Rerate Products

Customer Review

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Greater China

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Greater China Review

See more picture

The 2011-2016 Outlook for Steel Sheet Metal Awnings, Canopies, Carports, and Patios in Greater China Feature

This econometric study covers the latent demand outlook for steel sheet metal awnings, canopies, carports, and patios across the regions of Greater China, including provinces, autonomous regions (Guangxi, Nei Mongol, Ningxia, Xinjiang, Xizang - Tibet), municipalities (Beijing, Chongqing, Shanghai, and Tianjin), special administrative regions (Hong Kong and Macau), and Taiwan (all hereafter referred to as "regions"). Latent demand (in millions of U.S. dollars), or potential industry earnings (P.I.E.) estimates are given across some 1,100 cities in Greater China. For each major city in question, the percent share the city is of the region and of Greater China is reported. Each major city is defined as an area of "economic population", as opposed to the demographic population within a legal geographic boundary. For many cities, the economic population is much larger that the population within the city limits; this is especially true for the cities of the Western regions. For the coastal regions, cities which are close to other major cities or which represent, by themselves, a high percent of the regional population, actual city-level population is closer to the economic population (e.g. in Beijing). Based on this "economic" definition of population, comparative benchmarks allow the reader to quickly gauge a city's marketing and distribution value vis-a-vis others. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

Check price now

Rerate Products

Customer Review